Sep 5, 2006 - 5:19 PM
|
|
|
Enthusiast ![]() Joined Oct 3, '02 From HOUSTON Currently Offline Reputation: 0 (0%) |
ok, so im coasting down to a stop when i get home, and all of a suddent when i try to put it in gear, the clutch has like a pop, and i cant engage in my gear, and when i press the clutch all the way in, it has like a loud whine, almost grind... i hope its not the clutch, i just changed it out about 2 years ago, not a lot of miles, no racing and i dont ride the clutch... plus there wasnt any burning and it has engaged fine the entire time...the only thing that i can think of that would be considered signs of wear would be is before, at idle, the car rand fine, then with the clutch pressed, no matter how far, there would be a slight whine/whistle... my thinking it has something to do with the hydrolic system, anyone have any input???
|
![]() |
Sep 14, 2006 - 10:15 AM
|
|
|
Enthusiast ![]() ![]() Joined Aug 18, '04 From Silverdale, WA Currently Offline Reputation: 0 (0%) |
If I was you I would get a quote from another shop. The described sound does sound like the throwout bearing. I would suspect either the master or slave cylinder for the not going into gear. I had the slave go out on a Ford that I had and it wouldn't go into gear unless the engine was off. My advice is to cut your losses and have it towed to another shop to have it checked out. Good luck.
|
quicknstyle more clutch problems Sep 5, 2006 - 5:19 PM
Bitter check the clutch system for leaks, low fluid level... Sep 5, 2006 - 6:54 PM
quicknstyle well i checked it out after my vacation, found som... Sep 6, 2006 - 6:28 PM
hitcachi yes that black floating thing is normal, its in al... Sep 6, 2006 - 9:45 PM
quicknstyle ok, well i have not bleeded the system yet... i do... Sep 12, 2006 - 9:53 AM
tnltracy I'm new to 6GC forums, but not maintenance on ... Sep 12, 2006 - 10:01 AM
quicknstyle but the fact that i have no pressure when i depres... Sep 12, 2006 - 10:32 AM
Bitter the low pedal is most likely air in the system. Sep 12, 2006 - 10:36 AM
quicknstyle ok so they said its my throw out bearring, now the... Sep 14, 2006 - 9:49 AM
rivaderci Yes it is your Throw out bearing and the reason yo... Sep 19, 2006 - 1:25 PM
tnltracy Agreed. sounds like they're going for as much... Sep 15, 2006 - 1:53 PM
dubk they're raping you on that. change out the ma... Sep 15, 2006 - 2:29 PM
TurboZo Clutch replacement should be around 500-600 with O... Sep 19, 2006 - 12:55 PM
quicknstyle well after pleading with the guys and getting my m... Sep 19, 2006 - 2:34 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 22nd, 2026 - 8:52 AM |