Sep 14, 2006 - 7:19 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
So I bought some brake shoes the other day and I was going to tackle my rear brakes yesterday, so I took the wheel off and quickly ran into a problem. My drums seem to be stuck. I pryed and pryed and they wouldn't budge. I tapped with a soft-headed mallet and they wouldn't budge that way either. It got to the point where I was standing there kicking it. I finally gave up and threw my wheel back on. For some reason I know someone will ask that stupid question "Did you have your E-brake on? durrrrrr" and the answer is no. Is there some sort of way that should get them off? The search function yeilded no real results.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() |
Sep 14, 2006 - 8:30 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
It spins freely, but is stuck. I suppose I can go down to the hardware store and get some 10mm bolts and try that route. Thanks for the diagram Lew, but I already had that, however the one I have is in ~ size 4 font. It came in the box with shoes.
Another thing is that the part numbers on the shoes are all the same. So does it matter which one is the front shoe and rear shoe? -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
Sep 14, 2006 - 8:34 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
QUOTE Another thing is that the part numbers on the shoes are all the same. So does it matter which one is the front shoe and rear shoe? no, just remember how it looks before u take it out then replacing, if you forget you can always look on the other side, just be sure to do one side at a time. -------------------- ![]() |
95CelicaST I'm having brake issues... Sep 14, 2006 - 7:19 PM
LewFX here you go. Sep 14, 2006 - 7:26 PM
LewFX just curious but is it possible to put rotors on i... Sep 14, 2006 - 7:43 PM
Galcobar As in put rotors on the rear wheels instead of dru... Sep 14, 2006 - 7:47 PM
LewFX you could also use 2 10mm bolts into the drum hole... Sep 14, 2006 - 7:56 PM
95CelicaST QUOTEno, just remember how it looks before u take ... Sep 14, 2006 - 8:58 PM
Bitter you can just swap the rear stuff from a GT over to... Sep 14, 2006 - 10:07 PM
Steevo A puller. I used a three prong puller to get mine... Sep 14, 2006 - 11:03 PM
94celicadude probably what happened is that your rear drum have... Sep 14, 2006 - 11:08 PM
Bitter 94 has it right, theres a lip. you'll have to... Sep 14, 2006 - 11:17 PM
94celicadude QUOTE(Bitter @ Sep 15, 2006 - 4:17 A... Sep 14, 2006 - 11:34 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 10th, 2026 - 11:23 PM |