injen intake, needed help with the hoses Options

[gtcoupe21]

whats up people i just bought an injen intake for a 94 gt 5sfe and i have completed the intial assembly of the intake but i faced some difficulty when i attempted to install the intake into my engine

i had difficulty in 2 areas

1. the instructions ask me to disconnect the hose which leads from the valve cover to a nipple on the throttle body and then connect that hose from the vavle cover to a nipple on the new intake. what i wanted to know is that then does the nipple on the throttle body stay open? or do i need to plug it because it will continue to suck air in into the throttle body.

2. i was also asked to remove the vaccum hose which is suppossedly located under the throttle body and connect it to a second nipple on the intake. however i cannot find such ha vaccum hose under the throttle body.

can anyone help me in answering these questions.

i would greatly appreciate it.

[HyperDeathKill]

Okay, connect the red hose to the valve cover and to a nipple. You have to cut apart the red hose, and put that little one way air thing inbetween it.

The second nipple, buy a breather filter at Autozone (or wherever) and plug it up.

http://www.6gc.net/photo.php?file=member_p...file&gbitu=1231

You can't see the breather filter, but it's just a small filter.