Blackout Sticker Options

[Killswitch]

http://www.stickercity.com/store/home.php?cat=2230

If I get this will it fold up because of the curve of the headlights and tail lights? Anyone know how to use this?

[Mynzeyes]

if you want to do it right, take the headlights off the car, and use some water w/ detergent, squeegie, heat gun, and patience. take off the rubber seal, and you can get it to form around the curves using the heat gun, and the water/detergent will let you move the film around as you place it. the squeegie will be use to get the water out from under it, and remove the air bubbles and what not. then, put the rubber seals back on, and that will cover the edges of the film, and there ya go. . the highs would be easier, bc you don't have to go around the corners, you'd just have to go to the outside of the lens, before the angle. seeing as how the seals touch the front of the light. this keeps you from having to paint your headlights. if you do decide to paint them, there's a much easier way than spraypaint and thinner. just get some window tint spraypaint from a hobby store (made for RC/model cars). i say try it out man. .