how do you hook up a manual boost controller?? Options

[nate95]

ok, i have a manual boost controller and i have hooked up up a million different ways and its still not working,, my turbo has 2 ports on the waste gate, and the another port on the turbo itself,, any body know how to run the vac lines for the turbo/wastegate/ and boost controller???

[JDM_ST205_WRC]

1. Cut the turbo to actuator line.
2. Splice the turbo end to the in of the boost controller.
3. Splice the actuator end of the line to the out of the boost controller.
4. Cut the remaining actuator line (VSV line) & plug both ends with a bolt or line cap (Make sure you use a clip to hold the bolt or cap in as they could blow out under pressure).

Note: Make sure you keep the boost controller box as close to the turbo as possible & the line runs short as possible.

If you drop me a pm with your e-mail addy I can forward you some diagrams & pics I made up when I did mine.