My Mods, Updated 8-9, gas door write up Options

[QuintinGT]

I felt like making my own thread. So here it is, this is what Ive done so far.






















If you hadnt noticed I like the clean and shaved look. And Im shooting for a Black and White theme, so far i think it looks pretty good. I dont have many big expensive things on my car just lots of little things that took a lot of time and energy, but it is worth it cause no one has a car like mine especially not an interior like mine.

This post has been edited by QuintinGT: Aug 9, 2007 - 2:10 AM

[QuintinGT]

Thanks guys and girls, Im glad you like it too.

The panels started out smooth that texture is just from the enamel paint I used.

First off your the man because your interior is the s***. How did you make that switch panel? and how did you relocate the cigarette lighter?

The switch panel was not easy, mainly because of the size of the hazard switch and dimmer. the harzard switch fit without any modification but the dimmer had to be made considerably smaller. if you wanted to do this without all the work it would not be to difficult if you had the hazard, dimmer and maybe one or two other switches, this way it wouldnt be so cramped. The hazard switch has seven wires that connect it so youll have to extend them. i cut off the plug and put in extensions. Keep in mind that your turn signals will not work if the hazard button is not plugged in so dont try to drive in the middle of putting this in. the dimmer has 3 wires that have to be extended.







the cigarette lighter was really easy, I bought an auxiliary output kit at Walmart for 5 bucks(at autozone too) and just drilled the hole and connected the 2 wires to the existing cigarette lighter wires. I would recommend using a mutimeter to find the + - wires cuase I did it wrong the first time and blew a fuse.

This post has been edited by QuintinGT: Oct 15, 2006 - 8:12 PM