7afe to 7age?, Found a 4age 16v T-VIS from an MR2.. help! Options

[Tom_T20]

Hi! I have a '98 Celica AT200, and i'm searching for a camshaft kit, does anybody know where i can find it?

This post has been edited by Tom_T20: Jul 11, 2007 - 4:29 PM

[playr158]

the F head can flow enough for 250.....

keep the F head and have a custom intake manifold built, along with a port and polish on the head that will always help....the crank is fine stock but cryo treating is always nice...i think pauter cut 7afe forged rod production so you'd want to contact someone to build you custom rods and pistons if your trying to go huge power....but stock rods that have been shot peened with 4age (or custom 7afe pistons) will hold up just fine...for around 200-250 (although they might not last really long...really long being like 70,000 miles)

if your going to do this i'd also look into at least honing the block if not potentially boring it out slightly to give you a nice clean wall..

This post has been edited by playr158: Oct 23, 2006 - 12:11 PM