greddy emanage ,i got one& need some help Options

[trd94]

ok i will be picking up a blue emanage kit with the injector,&ignition,harness along with the usb cord and the support tool, i just need to find out how to install it ,any one got any ideas or advice, thanks for any help

This post has been edited by trd94: Oct 22, 2006 - 2:35 PM

[presure2]

since there is no direct install intructions for the GT or ST, your going to have to make your own wiring diagram basicly.
you need the pinouts for your ecu, and match up the apropriate signal from the emanage to the ECU.
looking at the crappy copied intructions they have online for it, it looks somewhat basic, like the SAFCII.
one thing i noticed right off the bat is it only gives you 5 rpm points??
if that is the case, seeing as how it corrects by manipulating the map sensor, you'd prolly be just as well served with the SAFCII.
i didnt realize the "blue" emanage was that basic.
seems like the "ultimate" is a huge step up.