 Lotek Pillar Pod |
 Oct 26, 2006 - 7:11 PM
|
 
|
 Enthusiast  Joined May 16, '05 From Toronto, Ontario Currently Offline Reputation: 8 (100%)  |
ok um i was just wondering.. when test fitting... did you have to remove anything to get the pillar to fit?
cause i just quickly tried it to see if it fit but it was WWWAAAYYY off... seemed impossible to put in unless i removed a-pillar and mounted it first... also... none of my 52mm gauges fit??? i guess i gotta sand a bit off from each hole... but then how do you get them into the 2nd and 3rd spot? cause mine are about 57mm deep and when i try to put it in... the holder above it is in the way... -------------------- |
 |
Replies
|
Oct 26, 2006 - 10:11 PM
|
|
 Enthusiast Joined Jun 19, '05 From Nebraska Currently Offline Reputation: 4 (100%) |
gaugepods.com? No, real lotek come from the actual site. That one might be real lotek but i really dont know and it would be hard to find out. As for the gauges, you put them in the pillar pod before you mount the pillar. Run the wires down behind the dash before you totally screw in the pillar so that you make sure that you dont cut into or pinch any wires. Now to mount the pillar, you just have to wiggle it in there and make it fit
-------------------- Teh Celica sleeps for Winter '06. Suspension overhaul begins........
|
Posts in this topic
elvasoshexai Lotek Pillar Pod Oct 26, 2006 - 7:11 PM
hitcachi pics to see what you talking about? Cause from you... Oct 26, 2006 - 8:04 PM elvasoshexai it must b legit since i bought it from gaugepods.c... Oct 26, 2006 - 9:30 PM
elvasoshexai QUOTE(hitcachi @ Oct 26, 2006 - 11:1... Oct 26, 2006 - 10:25 PM elvasoshexai actually.. wtf.. i think i got the wrong pod...
fr... Oct 26, 2006 - 10:39 PM Shocker i have a lotec triple gauge pod and that my freind... Oct 26, 2006 - 10:53 PM elvasoshexai QUOTE(Shocker @ Oct 26, 2006 - 11:53... Oct 26, 2006 - 11:00 PM Batman722 that's not the correct pod Oct 26, 2006 - 11:11 PM pandakid yea mine is having the same problem it dosen't... Oct 27, 2006 - 1:25 AM elvasoshexai QUOTE(pandakid @ Oct 27, 2006 - 2:25... Oct 27, 2006 - 8:10 AM shin yea that's not the right pod.. you can tell ri... Oct 27, 2006 - 11:01 AM pandakid QUOTE(elvasoshexai @ Oct 27, 2006 - 8... Oct 27, 2006 - 2:31 PM elvasoshexai QUOTE(pandakid @ Oct 27, 2006 - 3:31... Oct 27, 2006 - 4:51 PM shin nice. that's wat i call professional. this giv... Oct 27, 2006 - 6:21 PM pandakid QUOTE(shin @ Oct 27, 2006 - 6:21 PM)... Oct 27, 2006 - 11:49 PM elvasoshexai i just got my replacement gauge pod today... but f... Nov 2, 2006 - 5:12 PM shin wat gauges do you have? Nov 2, 2006 - 5:40 PM elvasoshexai QUOTE(shin @ Nov 2, 2006 - 5:40 PM) ... Nov 2, 2006 - 6:12 PM pandakid QUOTE(elvasoshexai @ Nov 2, 2006 - 5... Nov 2, 2006 - 6:15 PM elvasoshexai ^ i posted 2 links somewhere above wth pics
QUOTE... Nov 2, 2006 - 6:19 PM elvasoshexai nobody's had the problem with the gauges being... Nov 3, 2006 - 9:02 AM Shocker QUOTE(elvasoshexai @ Nov 3, 2006 - 10... Nov 3, 2006 - 10:22 AM Batman722 QUOTE(elvasoshexai @ Nov 3, 2006 - 9... Nov 3, 2006 - 9:37 PM elvasoshexai QUOTE(Batman722 @ Nov 3, 2006 - 9:37... Nov 3, 2006 - 10:42 PM Valo666 QUOTE(elvasoshexai @ Oct 26, 2006 - 7... Nov 3, 2006 - 11:14 AM elvasoshexai QUOTE(Valo666 @ Nov 3, 2006 - 11:14 ... Nov 3, 2006 - 11:26 AM hitcachi where did you order your gauges from and what kind... Nov 3, 2006 - 12:20 PM elvasoshexai QUOTE(hitcachi @ Nov 3, 2006 - 12:20... Nov 3, 2006 - 12:58 PM Batman722 I cut into the stock a pilar plastic (kinda knotch... Nov 3, 2006 - 10:55 PM elvasoshexai QUOTE(Batman722 @ Nov 3, 2006 - 10:5... Nov 3, 2006 - 11:22 PM Batman722 you might just want to "nudge" it into p... Nov 4, 2006 - 2:03 AM pandakid got mine today,my gauges (glowshift)are fitting ei... Nov 5, 2006 - 1:51 AM pandakid i put my pillar on i had to nudge it in with a tad... Nov 6, 2006 - 4:20 PM elvasoshexai where did you have to sand? Nov 6, 2006 - 8:04 PM pandakid where you put the gauges into,the pod that holds t... Nov 7, 2006 - 12:51 AM celiracer NVM I figured out what i needed. Jan 11, 2007 - 5:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 1st, 2025 - 9:26 AM |