![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jun 25, '06 From Bremerton, Washington Currently Offline Reputation: 1 (100%) ![]() |
so im planning to take my spoiler off tommorow and i was wonderin how big are the holes and what do i patch it up with. Do you have to patch up the wholes right away?
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) ![]() |
I covered the holes left from the three post by doing the following (interim fix though):
Pick up a couple packs of those interior panel plastic fasteners (the serrated plastic plugs) and a box of thick o-rings that will be SNUG around the base of the fasteners. Stick the fasteners in the holes from the top, then work the O-ring over the top of the fastener and down around the base. This will pull the fastener backwards against the hatch and will help to create a positive seal with the O-ring. I haven't had a leak yet and it's been six+ months. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 12:44 PM |