rx-7 injectors Options

[Stu37363]

if anyone goes looking for the rx-7 injectors for the 5sfte setup try www.rx7club.com

i put up a wtb on their site and was swamped with replies the same day... i had been meaning to put this up awhile back but i forgot. i beleive they know them as 89-91 s5 n/a injectors.

460cc RX-7 Injectors Pt. #195500-2010

think i ended up paying $15 a peice shipped for them.

hope this helps someone

[WALKER]

A question about having injectors cleaned. Is there a "shelf life" on them after they are cleaned, meaning should they be used a certain number of days after they are cleaned or is there a way that you should store injectors if you have had them cleaned and new O rings installed to prolong their life before installing them?

[elvasoshexai]

How do I store injectors when not in use?

Corrosion is probably the injectors biggest enemy. Gum, varnish, and other normal deposits can be removed by cleaning. Since the internals of injectors are made of various steel alloys, they will corrode or rust. Once the fuel inside dries out, the deposits inside harden and the pintle can stick to the seat making it inoperable. There is enough moisture in the air in most parts of the U.S. to cause corrosion with the pintle and seat will not seal and give you a leaky injector if allowed to happen.

If you plan to store injectors for any length of time, wipe the dirt off them and spray them (inside & out) with a penetrating oil like WD40 and seal them in plastic bags then store them in a dry place.

A question about having injectors cleaned. Is there a "shelf life" on them after they are cleaned, meaning should they be used a certain number of days after they are cleaned or is there a way that you should store injectors if you have had them cleaned and new O rings installed to prolong their life before installing them?