![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jul 31, '03 From GA Currently Offline Reputation: 0 (0%) ![]() |
I just bought my 6th gen (96 ST) not to long ago. Not knowing when the most recent oil change was I decided to go ahead and do it. I went and picked up an oil filter (Purolator $3.50---good choice?) and I have some Castrol GTX 10w 30. Get under my car and find the oil filter(beneath the exahuast manifold) and think I find the drain bolt. Basicaly just about 12 inches below the filter. REally i just want to veriffy this is the right bolt. Also is that oil and filter a good recomendation for my car ( 138,000 miles).
*edit*I tried to undo the bolt and just couldnt get it off. I"m going to try again in a little bit. Would much prefer to do this myself. Cormudgen |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
can anyone tell me what the "recommended" (owners manual) weight of oil for a 3s-gte is? I know your climate and such play a factor, but I just want to know what is recommended.
On another note, I've read that fram filters are bad. They didnt flow or filter very good. k&n on the other hand, has a high flow rate, but because of the increased flow, compramises filtering ability. |
![]() ![]() |
Lo-Fi Version | Time is now: September 13th, 2025 - 8:48 AM |