Nov 13, 2006 - 5:03 AM
|
|
|
Enthusiast ![]() Joined Aug 22, '06 From Daygo Currently Offline Reputation: 0 (0%) |
|
![]() |
Nov 13, 2006 - 8:39 AM
|
|
|
Enthusiast ![]() ![]() Joined Jul 23, '06 From Chester - UK Currently Offline Reputation: 0 (0%) |
Same subs i have & very good choice.
maybe get a pro to wire them up if your unsure or once wired get a 2nd opinion from a pro on set up. Other than that aslong as u remember the jlw3's do NOT need massive power so around 350RMS will be the maximum load they will want to run best so adjust the gain accordingly & at the same time don't under power them too much. ALSO make sure you run them in at half volume etc for a good 15+ hours before you let em rip If you didn't know there is many ways to wire the W3 to get different OHMS so take a look on google for your prefered setup!!!! This post has been edited by Alex-UKSC: Nov 13, 2006 - 8:41 AM -------------------- My Celica Is Now For Sale
|
Snodalo hooking up system Nov 13, 2006 - 5:03 AM
massbrandon make sure your gain isnt all the way up
make sure ... Nov 13, 2006 - 7:36 AM
Snodalo thanks, also alex-uksc... i didnt read your reply ... Nov 14, 2006 - 1:32 AM
Alex-UKSC You shouldn't have done any damage yet but all... Nov 14, 2006 - 1:47 PM
Mystify. Ohms is the measure of resistance in a circuit. Lo... Nov 14, 2006 - 7:01 PM
Snodalo wow thanks alot. all that stuff really helps. im g... Nov 14, 2006 - 8:31 PM
Snodalo well i rewired my subs to parallel... so i get 1Oh... Nov 15, 2006 - 3:20 AM
soven lay off the bass adjustment. If you want to play w... Nov 15, 2006 - 5:58 AM
Alex-UKSC I was saying about using low volume as when a sub ... Nov 15, 2006 - 1:27 PM
Snodalo alright thanks everyone. my friend has a dmm but w... Nov 16, 2006 - 5:23 AM
Alex-UKSC Just use it on half power for aslong as possible a... Nov 16, 2006 - 9:58 AM
soven Gains = sensitivity control
If you turn the volum... Nov 17, 2006 - 4:17 PM
Mystify. If you followed the tutorial correctly and set you... Nov 19, 2006 - 5:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 11th, 2026 - 11:20 AM |