Nov 13, 2006 - 5:03 AM
|
|
|
Enthusiast ![]() Joined Aug 22, '06 From Daygo Currently Offline Reputation: 0 (0%) |
|
![]() |
Nov 17, 2006 - 4:17 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
Gains = sensitivity control
If you turn the volume on your headunit to 58, then your gains on the amp have to be turned down anyway in order to prevent killing your sub. Think of it this way. gains low, headunit volume high is the same as gains high, headunit volume low. I told you to only go to about 50 on the headunit because, the headunit by itself can send a clipped signal when overdriven. It is your choice if you want to continue at 58. Not my money. |
Snodalo hooking up system Nov 13, 2006 - 5:03 AM
massbrandon make sure your gain isnt all the way up
make sure ... Nov 13, 2006 - 7:36 AM
Alex-UKSC Same subs i have & very good choice.
maybe ge... Nov 13, 2006 - 8:39 AM
Snodalo thanks, also alex-uksc... i didnt read your reply ... Nov 14, 2006 - 1:32 AM
Alex-UKSC You shouldn't have done any damage yet but all... Nov 14, 2006 - 1:47 PM
Mystify. Ohms is the measure of resistance in a circuit. Lo... Nov 14, 2006 - 7:01 PM
Snodalo wow thanks alot. all that stuff really helps. im g... Nov 14, 2006 - 8:31 PM
Snodalo well i rewired my subs to parallel... so i get 1Oh... Nov 15, 2006 - 3:20 AM
soven lay off the bass adjustment. If you want to play w... Nov 15, 2006 - 5:58 AM
Alex-UKSC I was saying about using low volume as when a sub ... Nov 15, 2006 - 1:27 PM
Snodalo alright thanks everyone. my friend has a dmm but w... Nov 16, 2006 - 5:23 AM
Alex-UKSC Just use it on half power for aslong as possible a... Nov 16, 2006 - 9:58 AM
Mystify. If you followed the tutorial correctly and set you... Nov 19, 2006 - 5:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 4:59 PM |