Nov 16, 2006 - 7:58 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Jan 29, '06 From Kitchener, ON, CA Currently Offline Reputation: 0 (0%) |
Ok guys and gals, looking for a bit of help. Got no heat in the car right now, no matter how high I may crank it up... I took apart the trim and took a look at the heater controls. The cable that leads to the engine is still connected, so it doesn't appear to be a problem with that. I'm thinking the cable may have come off at the other end in the engine, as the heater control dial was a little stuck at one point and required a bit of force to turn it to the higher temperatures. I don't believe it's the thermostat, as my engine temp guage still works fine. Does anyone have any input into this, or can point me where on the engine I should be looking for something wrong? It's a 5S. Thanks in advance! |
![]() |
Nov 18, 2006 - 9:06 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
There is also a blue cable on the inside that controls the mixer door. Make sure it's still connected and working.
-------------------- ![]() Project ST204.5 99.88946% complete... |
celicurr heating system help Nov 16, 2006 - 7:58 PM
celicurr ok, I had a chance today to look around in the eng... Nov 17, 2006 - 4:49 PM
celicurr just got in from fixing it today... I looked up so... Nov 18, 2006 - 5:43 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 12:44 PM |