Injen Intake Question, Need to clear up some things Options

[trdproven]

I know this topic has been discussed many times. but the posts I've read is not clear enough for me to understand. Ok, if you look closer near the throttle body, there is a small pipe opening, what goes there, do I just cap it or do I put something? Second, some people say to cap the opening (opposite side of the sensor) but in this pic there is a breather hose connected. Now, originally, this breather hose connects somewhere towards the throttle body. So in this pic, for example, the hose was disconnected from the TB side and connected to the intake pipe side? Confused here. Does anyone have enough info on this. I mean I've read the threads but it doesn't answer or just confuses me more. Thanks.

(pic is from 6strngs' thread)



This post has been edited by trdproven: Nov 21, 2006 - 1:06 AM

[trdproven]

#1 can either connect the hose from intake to the valve cover. Or you can take that hose out and cover the intake hole, and put a breather on the valve cover. Mine is connected with a hose. But with my injen intake thats the only hose that goes into my intake, besides the mass air plug.

So what happens if I connect the hose from the valve to the intake, what happens to that same hose that was connected to the TB, there will be a hole left. Also, you should have an extra hole on the back side near the TB.

Still confused. Everyone says different things or has different styles.