Nov 25, 2006 - 12:13 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
ok so the swap is running and we have gotten her to drive, but the brakes are lacking ... they work only to the floor but barely... (ebrakes not on there right now, no pads or nothing at the moment.)
they are bled and have fluid in the res... my thoughts are.. maybe there is still air in the lines? the pedal does not pusle at all just is pretty weak to the floor and works barely.... any ideas? |
![]() |
Nov 25, 2006 - 3:45 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
re-bled the brakes, they work a lot better now.. ill check the booster though too.
The e-brake pads are off completly since the pads are dead and so are the cables. I'm going to buy new ones from toyota |
jcbass7 Another swap issue Nov 25, 2006 - 12:13 PM
lagos are you sure you connected the brake booster vac l... Nov 25, 2006 - 1:16 PM
Dr_Tweak What do you mean the ebrake's not on there at ... Nov 25, 2006 - 1:58 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 16th, 2025 - 3:15 PM |