Axle Install Trouble, passenger side bracket problems Options

[jcbass7]

Ok so i installed the driver side axle with no problems,
but when i went to put the passenger side axle in the bracket on the back of the 3s to hold the mid joint on the axle does not line up. no biggie so i go snatch the bracket off of my old 5sfe... but no dice. it wont bolt to the back of the 3s.

am i missing something.? please help me out on how you have all gotten this part of the swap to work

thanks!
Jesse

[jcbass7]

ok so yea the axle seal leaks bad.. where can i buy a new seal for the driver side axle??

thanks

edit: read another thread, i guess i can buy these at advance auto? sounds good. should i replace both??

This post has been edited by jcbass7: Nov 25, 2006 - 3:49 PM

[Yellow94GT]

ok so yea the axle seal leaks bad.. where can i buy a new seal for the driver side axle??

thanks

edit: read another thread, i guess i can buy these at advance auto? sounds good. should i replace both??

I would recommend you do them both now while your already down there. I leak later means more time spent since it will probably leak at an inconvenient time.

Yellow94GT