how to install spark plugs, and wires Options

[Celica94GT]

i just ordered a set of accel wires with bosch platnium spark plugs, i have never replaced these before, so im not really sure what im doing. any help would be appreciated, thank you.

[98celica3]

all you do is take the old wires out. try to do this one at a time and match the corresponding accell wire with the stock one so you know what wire goes to what cylinder. to take the spark plug out first remove the plug wire. use a 5/8 socket(preferabely a spark plug one with the rubber in the bottom so you don't break the plug), an extension bar and a ratchet and losen the plug and pull it out. when you put the new one in do the opposite, obviously, but do not tighten too much. it's easy as that. e-mail me if you have any q's
adam