![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
just wondering if any of you guys are using a universal silencer on a 3in tip muffler and what you would recommend?
im not looking to make my exhaust quieter, but i am looking to restrict the air flow a bit. i noticed that with my ebc totally off, my boost creep is crazy. it starts to hit 7psi and it stays there under 4k, but from 4-7k it starts to boost creep to 14psi. thats a lot of creep! im thinking that maybe i can create some backpressure with a silencer so that the WG has less exhaust flow to deal with. i figure the silencer is cheap enough to give it a shot. im also going to test my WG to make sure its not hitting the 3in DP i have. so, post some silencer links guys and tell me what you use! -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
could you just turn the boost down for the winter?
if it spikes it wont be spiking at a high psi. thats my band aid suggestion. for fixing the problem id play with the boost controller first. The bleeding hole might be clogged with oil or gunk. if thats clogged you will be more susceptible to creep. the thing i don't understand is, id run the ct26 with only a foot long dp and never experienced creep. This post has been edited by x_itchy_b_x: Dec 4, 2006 - 10:50 AM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: September 19th, 2025 - 4:29 PM |