6G Celicas Forums

Welcome Guest ( Log In | Register )

> im wanting to do a swap
post Dec 4, 2006 - 11:54 PM
+Quote Post
mneal2_92788



Enthusiast
****
Joined Nov 7, '06
From Lawrence IN, 46226
Currently Offline

Reputation: 17 (100%)




alright i have lookeed at a few engines, i think i may get a 4AGZE or a 4AGE. i want the z b/c its already turboed and comes with everything i would need including an ECU for 1200 plus shipping. what do you all think? any better ideas?
 
Start new topic
Replies
post Dec 5, 2006 - 1:37 AM
+Quote Post
eggman40



Enthusiast
****
Joined Aug 17, '04
From California
Currently Offline

Reputation: 20 (100%)




QUOTE(mneal2_92788 @ Dec 4, 2006 - 9:30 PM) [snapback]507858[/snapback]
mmkk, then, what info does anyone have about a 3s swap? i found one thats turbo with the wireing harness, ECU, 5-speed tranny, and everything else. its a 3SGTE and is also 1200.
QUOTE(mneal2_92788 @ Dec 4, 2006 - 10:03 PM) [snapback]507868[/snapback]
oh, it has the intercooler too, it has everything, and it is a direct bolt on, i will more than likely go with the 3SGTE, thanx for the help all
QUOTE(mneal2_92788 @ Dec 4, 2006 - 10:18 PM) [snapback]507874[/snapback]
alright, before i complete my decision, i need to know if a 1JZGTTE Twin Turbo will fit in a gt celica. i know its a 2.5 and twin turboed, but would it bolt in or would mods galore be needed? is the 3SGTE better?




Whoa! man you gotta slow down. youre getting way ahead of yourself. First off, the 3s is not entirely a direct bolt on, even with the GT. It will definitely be easier if you use the same tranny and cables but you still have to worry about having your wiring done, some form of custom exhaust work, if you want to keep a/c you have to switch over the pump...etc. there are many variables. Which leads me to my second point, you should really look into buying a clip apposed to just the engine itself with a harness. You will be missing many things that are neccesary for the swap, and it will cause you headaches.

And No, a 1jz will not fit, its a 6cyl rwd motor which will require huge custom fabrication which will cost a lot of $ long story short, wont work

You should get familliar with the stickies at the top of the forums, there is plenty of research there. About 95% of your questions will be answered there. what ever your decide on, good luck with it! wink.gif

This post has been edited by eggman40: Dec 5, 2006 - 1:38 AM

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 16th, 2025 - 1:59 PM