![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 31, '04 From Milwaukee Currently Offline Reputation: 2 (100%) ![]() |
Ive had my swap done for a couple of months now(3rd gen 3sgte with 5sfe tranny) and i noticed that the car shimmys real bad when i drive..I figured it was just a alignment problem but when i took it in to get aligned, the guy said thats not the problem. He said the problem is the half shafts. My car is lowered approx. 1.5 inches and i guess that half shalfs are too long or something so he said i need to find some sort of different half shafts...does anyone know what im talkin about or what he is talking about. I would most certainly appreciate it. thanks guys
Ryan This post has been edited by Baddica95: Nov 28, 2006 - 8:25 PM |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 16, '03 From Bay area Currently Offline Reputation: 0 (0%) ![]() |
since it is not speed dependent (meaning when you go 10mph it will shake just as bad as when your going 500 miles an hour), i will have to say its not axel/half shaft/or wheel related.
Its most likely your motor mounts because it only shakes when your accelerating. Probably the rear motor mount when bad. |
![]() ![]() |
Lo-Fi Version | Time is now: August 3rd, 2025 - 1:27 PM |