404 Lip Kit?, Question.. Options

[cnelson]

Ok, i'm seriously thinking about buying the 404 lip kit, but what i need to know is how it installs? I know it just goes on the front bumped and the side and the rear but does it just screw on, or do you need to mold it? Cause me and my friend would probably do it and i need to be sure that we'll be able too. Thanks. -cnelson.

[easternpiro1]

i STRONGLY SUGGEST you DONT mold your front lip you can go to autozone or advance and get a rivet set and a rivet gun, have a friend or 2 line the lip up with the bottom end of your front bumper and poke rivets where you see fit when you poke through the non metal portions of the car (bumper) you can be ghetto and place some sort of sheet metal on the other side so that the rivet wont slide out of the plastic (friend of mine used pices of a soda can folded up)

if you mold your front bumper prepare to have to deal with it scraping or if it hits something, cracking the mold and making it look worse. if you just rivet it, you can remove the lip to fix it, or get a new one and start over if you want...trust me, my lip is kinda screwed


cheers!