Installing Gauges, Oil Pressure, Water Temp troubles Options

[jcbass7]

Searched and couldn't find what i needed.. (swap related so i posted here, sorry if it should be in the interior/elec)

I'm installing an oil pressure gauge and a water temp gauge..

they are both electric and were made by prosport.

My questions are... do i need to tap into things for the probes/senders or are there stock places i can bolt these into? Or..... should i tap the wires off of the stock sensors?

This post has been edited by jcbass7: Dec 23, 2006 - 4:40 PM

[lagos]

for the oil gauge.... you dont NEED the tee. you can just ditch the factory sender and screw in the one for the oil gauge. you just have to make sure the thread is metric on the prosport sender. if its not, then youll need to buy a bag of metric adapters that sunpro makes. you can find them in most car parts stores.

if it doesn't want to screw in, dont force it, cause you could damage the threads in the head and end up with a nice oil leak.