![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
Searched and couldn't find what i needed.. (swap related so i posted here, sorry if it should be in the interior/elec)
I'm installing an oil pressure gauge and a water temp gauge.. they are both electric and were made by prosport. My questions are... do i need to tap into things for the probes/senders or are there stock places i can bolt these into? Or..... should i tap the wires off of the stock sensors? This post has been edited by jcbass7: Dec 23, 2006 - 4:40 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
Edit:
Ok so here is a pic, its the one with the yellow wire correct?? ![]() So while this is all apart where should i tap to put in the water temp sensor?? ![]() This post has been edited by jcbass7: Dec 24, 2006 - 12:33 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 5:50 PM |