 Installing Gauges, Oil Pressure, Water Temp troubles |
 Dec 23, 2006 - 4:38 PM
|
 
|
 Enthusiast  Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%)  |
Searched and couldn't find what i needed.. (swap related so i posted here, sorry if it should be in the interior/elec)
I'm installing an oil pressure gauge and a water temp gauge.. they are both electric and were made by prosport. My questions are... do i need to tap into things for the probes/senders or are there stock places i can bolt these into? Or..... should i tap the wires off of the stock sensors? This post has been edited by jcbass7: Dec 23, 2006 - 4:40 PM |
 |
Replies
|
Dec 23, 2006 - 11:46 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
ok for the oil pressure you have 2 options...you can use the gauge to replace your stock oil pressure switch (then your low oil light on the dash would remain off) or you can get an adapter like this and use both
 adapter from tunertoys  stock ^^  stock with adapter and gauge unit for the water temp...maybe defgeph or nightryder will be around soon to drop some knowledge 
-------------------- |
|
Dec 27, 2006 - 10:48 PM
|
|
 Enthusiast Joined Mar 9, '05 From Oakland, Cali Currently Offline Reputation: 46 (100%) |
QUOTE(Batman722 @ Dec 23, 2006 - 11:46 PM) [snapback]512748[/snapback] ok for the oil pressure you have 2 options...you can use the gauge to replace your stock oil pressure switch (then your low oil light on the dash would remain off) or you can get an adapter like this and use both adapter from tunertoys stock ^^ stock with adapter and gauge unit for the water temp...maybe defgeph or nightryder will be around soon to drop some knowledge does that fitting fits on our op sensor?....the same thread as ours?....or are their any specific thread i need to take note b4 orderin these puppies... btw, jcbass i measured it as 38.1 mm This post has been edited by DeW_H0e_GT: Dec 27, 2006 - 11:18 PM --------------------  |
Posts in this topic
jcbass7 Installing Gauges Dec 23, 2006 - 4:38 PM
Consynx both i'd suggest getting somethign to tap with... Dec 23, 2006 - 5:32 PM jcbass7 well i have both sender units, a temp probe thing ... Dec 23, 2006 - 6:11 PM lagos for the oil gauge.... you dont NEED the tee. you c... Dec 24, 2006 - 12:39 AM jcbass7 Edit:
Ok so here is a pic, its the one with the y... Dec 24, 2006 - 8:14 AM jcbass7 i found this thread on MR2OC, but i don't want... Dec 24, 2006 - 10:07 PM hitcachi I know that you are workin on a 3S but it should b... Dec 24, 2006 - 10:16 PM jcbass7 nice nice thanks,
did you need any special adapte... Dec 24, 2006 - 10:33 PM presure2 thats the way to go for a clean install for the te... Dec 24, 2006 - 10:56 PM lagos what do you think of the prosport gauges so far? h... Dec 25, 2006 - 12:51 AM
jcbass7 QUOTE(lagos @ Dec 25, 2006 - 12:51 A... Dec 25, 2006 - 9:08 AM presure2 ebay is your friend, jesse..lol
http://cgi.ebay.co... Dec 25, 2006 - 10:31 AM jcbass7 QUOTE(presure2 @ Dec 25, 2006 - 10:3... Dec 25, 2006 - 10:46 AM DeW_H0e_GT any1 kno whats the diameter of the radiator hose i... Dec 25, 2006 - 6:43 PM jcbass7 QUOTE(DeW_H0e_GT @ Dec 25, 2006 - 6... Dec 25, 2006 - 7:44 PM DeW_H0e_GT i also found a new product..well not so new....
t... Dec 27, 2006 - 11:46 PM eggman40 QUOTE(DeW_H0e_GT @ Dec 27, 2006 - 8... Dec 28, 2006 - 5:35 PM presure2 yea, those are pretty common too, only problem wit... Dec 28, 2006 - 11:38 AM 99GT Why are the prosport gauges or twosrus so cheap? c... Dec 28, 2006 - 8:16 PM jcbass7 I love them, have been using them for a week now..... Dec 29, 2006 - 12:22 AM jcbass7 ok so i thought it was too xpensive to buy one of ... Jan 3, 2007 - 12:04 AM presure2 QUOTE(jcbass7 @ Jan 3, 2007 - 12:04 ... Jan 3, 2007 - 3:26 AM DeW_H0e_GT QUOTE(jcbass7 @ Jan 3, 2007 - 12:04 ... Jan 4, 2007 - 1:43 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 24th, 2025 - 3:34 AM |