6G Celicas Forums

Welcome Guest ( Log In | Register )

> Help with sputtering 3sgte, just wanted some opinions as to what it could be
post Dec 30, 2006 - 8:35 PM
+Quote Post
eggman40



Enthusiast
****
Joined Aug 17, '04
From California
Currently Offline

Reputation: 20 (100%)




yesterday i was on the freeway with no traffic so i decided to give my car a little exercise. I jumped on the throttle at about 55mph... the car was in Wot and as it accelerated,but then i felt the car stutter for a split second. It almost felt as if i took the car down to about 80% throttle for less then second then back to100. It still reaches full boost at 15psi but just around 8 or 10 psi at WOt is where i feel this....



Anyone know what this could be? Is it the turbo? fuel?bov? any help would be appriated. thank you

 
Start new topic
Replies
post Dec 30, 2006 - 11:05 PM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




you got knock response. lower your boost.

this whole "15psi is ok" that we get from the usdm mr2 guys, doesn't always apply to our swaps because we have jdm ecu's with more timing advance. we have a harder time running that much boost on pump gas.

if you make yourself a tvsv led's, you should be able to see when this happens.


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Dec 31, 2006 - 8:20 PM
+Quote Post
Insanity-74

Enthusiast
***
Joined Jan 9, '05
From Under the car
Currently Offline

Reputation: 0 (0%)




QUOTE(lagos @ Dec 31, 2006 - 4:05 AM) [snapback]514140[/snapback]

you got knock response. lower your boost.

this whole "15psi is ok" that we get from the usdm mr2 guys, doesn't always apply to our swaps because we have jdm ecu's with more timing advance. we have a harder time running that much boost on pump gas.

if you make yourself a tvsv led's, you should be able to see when this happens.


If you are running JDM ECU`s then i`d agree with this...Japland pump gas is 101ron...you need to be running at least 98 ron to help prevent knock.....or get yourself a UK ECU which should let you run 95ron with no problems what so ever.
post Jan 1, 2007 - 12:53 AM
+Quote Post
eggman40



Enthusiast
****
Joined Aug 17, '04
From California
Currently Offline

Reputation: 20 (100%)




QUOTE(Insanity-74 @ Dec 31, 2006 - 5:20 PM) [snapback]514290[/snapback]
QUOTE(lagos @ Dec 31, 2006 - 4:05 AM) [snapback]514140[/snapback]

you got knock response. lower your boost.

this whole "15psi is ok" that we get from the usdm mr2 guys, doesn't always apply to our swaps because we have jdm ecu's with more timing advance. we have a harder time running that much boost on pump gas.

if you make yourself a tvsv led's, you should be able to see when this happens.


If you are running JDM ECU`s then i`d agree with this...Japland pump gas is 101ron...you need to be running at least 98 ron to help prevent knock.....or get yourself a UK ECU which should let you run 95ron with no problems what so ever.




shoot... i wish i had 95 here in cali we're only allowed 91... BS! anyway, do you or anyone know if the UK ecu is plug and play? or would it cause problems?





second--- I dont remember right now it i heard air leak like you said Lagos... ill try again tomorrow and see if i hear any kind of air leaking...





3rd--- thanks doc ill look into that and hopefully get one built next week.





Thanks again guys for all the help !


Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 17th, 2025 - 4:30 AM