![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) ![]() |
I started my 3S swap for the first time tonight... It fired right up on the very first attempt and kept running until I turned it off. That was a pleasant surprise since this is my first swap and harness I've done.
I just need to find that damn clamp for the AFM. I know it's hiding in my garage somewhere. If all I lost was a clamp then I'd say I'm doing pretty good. The open 3" downpipe makes this thing sound mean. Turbo spool is VERY audible even during light throttle in neutral. Cold idle is normal at 1100 RPM and drops to 800 once the engine is up to operating temperature. The RC AFM and ECU seem to be working great on the 90-91 harness converted to a 92-93 RC harness. All my gauges seem to function normally and all the dummy lights work fine too. I'm expecting a code 54 and low boost mode but that's fine with me until I get this tank of 87 octane used up. First test drive will be tomorrow after work once I slap the axles in and fill the transmission with fluid. Time to get some much needed sleep. -------------------- ![]() Project ST204.5 99.88946% complete... |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) ![]() |
Took it for a test drive tonight. It's insane even without the torque converter lockup working. I don't have a 2nd gear either since the transmission is in manual mode... but with as quick as 40mph sneaks up on you I'm really excited to see what this thing can do with a fully functional transmission.
I'm going to feed the ECT ECU an IGF signal and see if that'll get it shifting. From what I've read in the troubleshooting sections is that if there is no IGF signal for 4 consecutive revolutions then the computer stops the engine... It doesn't say anything about stopping the transmission solenoid control but it would make sense that the computer would shut everything down since the engine's not supposed to be running anyway. I don't think the neighbors would appreciate me running around the neighborhood with an open DP so I don't have any videos for you all but I'll try and get some pictures tomorrow after work when the sun is still out. -------------------- ![]() Project ST204.5 99.88946% complete... |
![]() ![]() |
Lo-Fi Version | Time is now: August 27th, 2025 - 8:58 PM |