6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte with GT Tranny., I need sugestion on clutch
post Nov 8, 2006 - 9:44 AM
+Quote Post
y2komar



Enthusiast
*
Joined Sep 21, '06
From New York City
Currently Offline

Reputation: 0 (0%)




what's up.
I am in the process of gathering all needed parts for my 3sgte swap to 94 GT
Okok ok
From what I read i will need a GT clutch disk and I a pressure plate for a 3sgte engine... RIght??

Well can anyone give me suggestion on what to buy.

Part numbers will help greatly, and maybe a good place to buy them.

thanks everyone

I have a 2nd gen 3s from japan. Are all 2nd gen all the same


--------------------
IPB Image
 
Start new topic
Replies
post Nov 8, 2006 - 11:35 AM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




read the stickies, its all in there. you can call up a company like spec, tell them that your doing a 3sgte swap with a gt tranny, and they will sell you a custom clutch kit with everything you need.

QUOTE
Lagos wrote:
Clutch:
if using the gt tranny with the 3sgte motor, you will need:
5sfe disk (or a custom made 3sgte disk, with the splines for the 5sfe tranny)
5sfe throwout bearing
5sfe alignment tool
3sgte pressure plate
3sgte flywheel (or just get your stock one resurfaced)

if you are going to use an mr2 turbo tranny, then all you need to do is buy a clutch kit for a 90-93 turbo mr2.

becareful when buying clutch disks for the 5sfe tranny. a stage 1 disk for the 5sfe is not the same thing as a stage 1 disk for the 3sgte. so if you get something like a stock oem clutch or a ACT street disk, it probably will not hold the power you need to put down.
if you call up a company like Spec or Clutchmasters and tell them about your project, they can make you a custom disk that can hold the power you will make and have the correct spline count that you need.

This post has been edited by lagos: Nov 8, 2006 - 11:36 AM


--------------------
15PSI - 30MPG - Megasquirt Tuned
post Jan 9, 2007 - 2:51 PM
+Quote Post
Alan



Enthusiast
**
Joined Jan 23, '05
From Malta
Currently Offline

Reputation: 2 (100%)




QUOTE(lagos @ Nov 8, 2006 - 11:35 AM) [snapback]500610[/snapback]

read the stickies, its all in there. you can call up a company like spec, tell them that your doing a 3sgte swap with a gt tranny, and they will sell you a custom clutch kit with everything you need.

QUOTE
Lagos wrote:
Clutch:
if using the gt tranny with the 3sgte motor, you will need:
5sfe disk (or a custom made 3sgte disk, with the splines for the 5sfe tranny)
5sfe throwout bearing
5sfe alignment tool
3sgte pressure plate
3sgte flywheel (or just get your stock one resurfaced)

if you are going to use an mr2 turbo tranny, then all you need to do is buy a clutch kit for a 90-93 turbo mr2.

becareful when buying clutch disks for the 5sfe tranny. a stage 1 disk for the 5sfe is not the same thing as a stage 1 disk for the 3sgte. so if you get something like a stock oem clutch or a ACT street disk, it probably will not hold the power you need to put down.
if you call up a company like Spec or Clutchmasters and tell them about your project, they can make you a custom disk that can hold the power you will make and have the correct spline count that you need.


Lagos my celica has a s54 tranny, and my orignial motor was the 3SGE not 5SFE I think it also comes in this model just to clarify. Right?


--------------------
IPB Image

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 22nd, 2025 - 1:11 PM