 wheel alignment tracking - celica |
 Jan 19, 2007 - 4:19 PM
|
 
|
|
Enthusiast Joined Oct 8, '06 From uk Currently Offline Reputation: 0 (0%)  |
hello, my car has been heading off to the left, on closer inspection i found the drivers wheel more worn on the inside edge (after having driven my car 5000 miles), (other side is good) so i swapped the worn tyre for one from the rear, and took the car to the garage for tracking (an expensive computerised four wheel geometry by Hunter Engineering, with computer printout stating the toe was out. however after paying, the car still goes to the left when left to steer on its own. The printour stated 16 inch wheels not 17inch, and also that my model was the later celica, would this have any effect on the result / tracking procedure/ adjustments?
any ideas why it goes to the left (tyres are not worn)?? it is an 97 st with 215 wheels, thanks for any help chris |
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 12:53 PM |