FS: JDM 3rd gen 3Sgte Options

[6gc95gt]

i have for sale a JDM 3rd gen 3SGTE engine and tranny. i dont have the full engine harness i also dont have the ecu and im not sure if the car comes with a MAF but i dont have that either. im looking for the best offer. if you need any pics i can email them with the provided address.

This post has been edited by 6gc95gt: Jan 16, 2007 - 5:17 AM

[WannabeGT4]

For the last time it's an RC or CS 2nd gen engine. You're going to need an AFM, ECU, Coil, Ignitor, fuel pump resistor, and injector resistor pack.

The ECU, Coil, and ignitor will need to be from a 92-93 celica alltrac in order to work on that engine.

The AFM plug is also different on the RC/CS wiring harness and you'd nee an RC ECU and AFM to make that work... very hard to find by the way. Otherwise you'll need to cut off the RC/CS AFM plug and splice in a regular plug to work with a non RC/CS ECU and AFM combo.

You're also going to need a heat exchanger, pump and water lines to make that W2A intercooler work.

IMO this engine is worth about $500 considering everything that's missing.

EDIT: just noticed the wiring harness isn't complete, that makes it worth about $400.

This post has been edited by WannabeGT4: Jan 20, 2007 - 6:26 PM