 7AFE engine code 71 (EGR fault) |
 Jan 19, 2007 - 5:47 AM
|
 
|
 Enthusiast  Joined Nov 29, '06 From Newnan, Ga. Currently Offline Reputation: 3 (100%)  |
Anybody got any hints or things that you have done to correct it?
|
 |
Replies
|
Jan 22, 2007 - 5:20 PM
|
|
|
Enthusiast Joined Nov 29, '06 From Newnan, Ga. Currently Offline Reputation: 3 (100%) |
QUOTE(Blakout16 @ Jan 20, 2007 - 8:59 AM) [snapback]519459[/snapback] however, if you've swapped a jdm 7afe/4afe - it will also read a 71 in engine codes. but im sure this isnt your case. Well well the plot thickens! Cleaned up my egr tube and valve and this afternoon, during the swap I discovered the difference between a JDM motor and a US motor! Viola! no port for EGT gases to flow thru. So I do have a JDM 7AFE(bought off ebay for cheap) although not advertized as such. Maybe it's time for Paypal Protection to step in and refund some cash. I'm glad GA isn't too stingent on emission testing. I ended up leaving the current EGT tube and valve installed and moved the EGT probe up against the head for some all inportant heat to see if the MIL light will illuminate again. I'll post results. I'm thinking maybe tap into the heater hose for a heat source for the probe. |
Posts in this topic
56willysnut 7AFE engine code 71 (EGR fault) Jan 19, 2007 - 5:47 AM
malpaso 71 = EGR (Exhaust Gas Recirculation) system malfun... Jan 19, 2007 - 8:41 AM Kwanza26 fix/clean your EGR... Jan 20, 2007 - 3:40 AM Blakout16 however, if you've swapped a jdm 7afe/4afe - i... Jan 20, 2007 - 3:59 AM 56willysnut Removed the EGR tube from the old engine to clean ... Jan 21, 2007 - 9:30 AM dans_st is there anymore info on JDM 7afe's here, did ... Jan 27, 2007 - 2:16 AM
6strngs my 5sfe threw a code 71 a couple days ago. I had d... Jan 27, 2007 - 5:23 AM 56willysnut QUOTE(6strngs @ Jan 27, 2007 - 10:23... Jan 29, 2007 - 8:08 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 10:06 AM |