took the 4th gen to a dynosession impromtu..., now with dynosheet Options

[easternpiro1]

whats up all, went to fayetteville nc today for a drop jaw winter cruise event and decided, what the hell, might as well take it to the dyno while im there.

didnt have a digital cam but did take a quick 15 sec vid from the camera phone (cant email from my phone plyr is gonna help me out)
could have had the results on my disk but his disk drive wasnt working on the computer....(will scan printed results tomorrow)


I ran@ 15 psi (which spiked to 17) Max power 266.23 and max torque 257.58 (clutch slipping)


Not bad results for a guy with no mods eh?

for those wondering:
stock srt4...no problem (the guy runs a 14 flat supposedly and i let him go off the line, with a slipping clutch and still was walking him down)
stock evo...no problem
stock wrx bugeye or whatever, no problem.

now to take it to the good doc, work out the tiny bugs, and do some schpanking of hineys

This post has been edited by easternpiro1: Jan 25, 2007 - 9:34 PM

[lagos]

wow fueling is like lean like a bitch then goes nasty rich.....

his fueling is actually pretty good. its just that this dynosheet makes it hard to read. hes in the low 12s for the lower range of the rpm's and 11s in mid range...and 10s in the upper.

piro ... how many runs did they let you make?

[easternpiro1]

wow fueling is like lean like a bitch then goes nasty rich.....

his fueling is actually pretty good. its just that this dynosheet makes it hard to read. hes in the low 12s for the lower range of the rpm's and 11s in mid range...and 10s in the upper.

piro ... how many runs did they let you make?

they let me run like 6 or so times (he tested it a few extra times for free! ) tranny started goin

btw. lagos, i asked on another thread where should i go from here? i saw u told another guy maybe a bigger turbo? what would you do? i just want 50-60 more hp