![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
After searching i have not quite yeilded the answers i need..
My swap is done, but my fans are wired to run all the time. what can i do to make them come on and off at a certain temp? should i buy a kit like this: Two's R Us Fan Relay and Thermo or can i figure it out without dishing out the cash? Fuel pump relay... do i need to do anything with this? I think its on all the time, should it not be? etc. i don't want to burn the pump out.. its an SW20 pump and i usually run around 45-48psi on average when driving. This post has been edited by jcbass7: Jan 31, 2007 - 7:51 AM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
Yep, or atleast it should be.
I had an extra wire coming out of the harness, and when i was finishing the swap we hooked it to a power lead and therefore it gave the fans power all the time. I remember you pointing that wire out to me when i got the harness back, do i need to wire that into the switch at the bottom of the radiator? |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 10:34 AM |