 manual tranny ECU replacing.... |
 Jan 30, 2007 - 2:54 PM
|
 
|
|
Enthusiast  Joined Nov 23, '05 From Charleston, WV Currently Offline Reputation: 1 (100%)  |
Hy guys.
Quik question. I going to replace ECU for manual on my car, because I was running with auto ECU about half year and I was having problems with accelaration. Anyway. I did 't check yet and I think it should not be a problem to change it. Well here is a question. Does manual ECU plugs right in or is there anything what should I know before start swaping. Thanks a lot... |
 |
Replies
|
Jan 30, 2007 - 11:55 PM
|
|
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
If that's the case, you need pinouts for both ECUs and the smaller plug for the manual ECU, which can probably be found on a Toyota in the junkyard.
Then you need to compare pinouts (for all three plugs, not just the different sized one to be sure) and move pins around to the correct locations. You can do this easily by de-pinning plugs. -------------------- New Toyota project coming soon...
|
Posts in this topic
miro1975 manual tranny ECU replacing.... Jan 30, 2007 - 2:54 PM
Coomer You'll probably want to compare pinouts on the... Jan 30, 2007 - 3:14 PM
miro1975 I'll try to do that if I will have any problem... Jan 30, 2007 - 3:56 PM hurley97 I have a swapped manual. my M/T ECU plugged into t... Jan 30, 2007 - 11:04 PM miro1975 That's what I did. I was playing with it and d... Jan 30, 2007 - 11:18 PM miro1975 Thank you guys. I just going to rewire the last co... Jan 31, 2007 - 8:13 AM Batman722 you swapped trannys and you're still running y... Jan 31, 2007 - 10:37 AM miro1975 Yes I'm running my a/t ecu and everything is p... Jan 31, 2007 - 11:46 AM Batman722 I know that the A/T ECU does have a lower rev limi... Jan 31, 2007 - 12:54 PM miro1975 Plugs are OK (new). Must be just that A/T rpm lim... Jan 31, 2007 - 6:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 21st, 2026 - 1:45 PM |