![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
After searching i have not quite yeilded the answers i need..
My swap is done, but my fans are wired to run all the time. what can i do to make them come on and off at a certain temp? should i buy a kit like this: Two's R Us Fan Relay and Thermo or can i figure it out without dishing out the cash? Fuel pump relay... do i need to do anything with this? I think its on all the time, should it not be? etc. i don't want to burn the pump out.. its an SW20 pump and i usually run around 45-48psi on average when driving. This post has been edited by jcbass7: Jan 31, 2007 - 7:51 AM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) ![]() |
ok so i snipped that wire.. but strangly enough they are still on all the time now..?!?
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) ![]() |
Is your coolant temp switch plugged in? If all your sensors are connected, its probably your coolant temp switch.
QUOTE(jcbass7 @ Feb 2, 2007 - 7:57 AM) [snapback]523401[/snapback] ok so i snipped that wire.. but strangly enough they are still on all the time now..?!? |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 12:54 PM |