 Distributor oil leak |
 Jan 22, 2007 - 6:08 PM
|
 
|
 Enthusiast  Joined Jan 22, '07 From North Carolina Currently Offline Reputation: 0 (0%)  |
I was just wondering if anybody has had any problems with their distributors leaking through the o-ring. I have tried to everything possible to stop it, but nothing works. I have a high volume oil pump, and I wonder if the higher oil pressure is causing it to leak through. Any ideas would be helpful.
|
 |
Replies
|
Feb 3, 2007 - 8:47 AM
|
|
 Enthusiast Joined Aug 18, '04 From Silverdale, WA Currently Offline Reputation: 0 (0%) |
Well for one you are supposed to be running 10W30 according to Toyota specs unless you are in below zero temps and then 5W30. I would check your oil pressure. If your high vulume pump has more than 4psi at idle and 36-70 at 3000rpm then you need to see if you can set it to a lower pressure. If it goes above that pressure then you might also blow out your rear main seal.
|
Posts in this topic
95CelicaRacer Distributor oil leak Jan 22, 2007 - 6:08 PM
Bigmeanbulldog55 I had the same problem and just replaced the o-rin... Jan 23, 2007 - 10:23 AM 95CelicaRacer I have replaced the o-ring, and it still leaked. ... Jan 23, 2007 - 11:09 AM 95CelicaRacer Oh yeah, I got the high volume oil pump through [u... Jan 23, 2007 - 11:12 AM Agent21 10w30 you say.....so that 5w20 I run might be an ... Feb 3, 2007 - 11:45 PM
presure2 QUOTE(Agent21 @ Feb 3, 2007 - 11:45 ... Feb 4, 2007 - 8:51 AM Agent21 Nah mine has a toyota seal on it (along with a few... Feb 4, 2007 - 6:40 PM 95CelicaRacer I have good news and bad news. Good news is that ... Feb 5, 2007 - 8:06 AM bindertch QUOTE(95CelicaRacer @ Feb 5, 2007 - 6... Feb 5, 2007 - 9:22 PM 95CelicaRacer I finally got an oil pressure gauge and readings w... Feb 13, 2007 - 7:35 PM bindertch It could be. It should have a check valve but that... Feb 13, 2007 - 11:33 PM 95CelicaRacer I'm pretty sure of the readings, but the oil p... Feb 14, 2007 - 7:57 AM alltracman78 Hold on a sec.
The dist oil seal isn't under d... Feb 14, 2007 - 2:07 PM 95CelicaRacer I rebuilt the engine myself not too long ago, and ... Feb 14, 2007 - 2:53 PM alltracman78 It's on the high side, but definitely still in... Feb 14, 2007 - 8:35 PM bindertch I have been doing some reading. You need to check ... Feb 14, 2007 - 9:23 PM alltracman78 ^
Very good point.
That can and will put pressure ... Feb 15, 2007 - 1:34 AM 95CelicaRacer I checked on the PCV valve last night and it is st... Feb 15, 2007 - 7:56 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 4th, 2025 - 12:17 PM |