 Distributor oil leak |
 Jan 22, 2007 - 6:08 PM
|
 
|
 Enthusiast  Joined Jan 22, '07 From North Carolina Currently Offline Reputation: 0 (0%)  |
I was just wondering if anybody has had any problems with their distributors leaking through the o-ring. I have tried to everything possible to stop it, but nothing works. I have a high volume oil pump, and I wonder if the higher oil pressure is causing it to leak through. Any ideas would be helpful.
|
 |
Replies
|
Feb 15, 2007 - 7:56 AM
|
|
|
Enthusiast Joined Jan 22, '07 From North Carolina Currently Offline Reputation: 0 (0%) |
I checked on the PCV valve last night and it is still working just fine.
 I am positive the seal is installed correctly and the crank had no wear on it either and the main seal housing was also good. The leaking was never coming from the seal during the rebuild of course I never revved it past 4000rpm. After the motor was broke in, I started revving close to 6000rpm. That is when it began to leak pretty bad. Unless the oil pressure spikes at that high of a rpm and it ended up blowing out the seal, I don't know why it would be leaking then. What do you all think? About the PCV valve, could I put a breather on it to allow more air to escape from the crankcase?  Or would it not be of much help?
|
Posts in this topic
95CelicaRacer Distributor oil leak Jan 22, 2007 - 6:08 PM
Bigmeanbulldog55 I had the same problem and just replaced the o-rin... Jan 23, 2007 - 10:23 AM 95CelicaRacer I have replaced the o-ring, and it still leaked. ... Jan 23, 2007 - 11:09 AM 95CelicaRacer Oh yeah, I got the high volume oil pump through [u... Jan 23, 2007 - 11:12 AM bindertch Well for one you are supposed to be running 10W30 ... Feb 3, 2007 - 8:47 AM Agent21 10w30 you say.....so that 5w20 I run might be an ... Feb 3, 2007 - 11:45 PM
presure2 QUOTE(Agent21 @ Feb 3, 2007 - 11:45 ... Feb 4, 2007 - 8:51 AM Agent21 Nah mine has a toyota seal on it (along with a few... Feb 4, 2007 - 6:40 PM 95CelicaRacer I have good news and bad news. Good news is that ... Feb 5, 2007 - 8:06 AM bindertch QUOTE(95CelicaRacer @ Feb 5, 2007 - 6... Feb 5, 2007 - 9:22 PM 95CelicaRacer I finally got an oil pressure gauge and readings w... Feb 13, 2007 - 7:35 PM bindertch It could be. It should have a check valve but that... Feb 13, 2007 - 11:33 PM 95CelicaRacer I'm pretty sure of the readings, but the oil p... Feb 14, 2007 - 7:57 AM alltracman78 Hold on a sec.
The dist oil seal isn't under d... Feb 14, 2007 - 2:07 PM 95CelicaRacer I rebuilt the engine myself not too long ago, and ... Feb 14, 2007 - 2:53 PM alltracman78 It's on the high side, but definitely still in... Feb 14, 2007 - 8:35 PM bindertch I have been doing some reading. You need to check ... Feb 14, 2007 - 9:23 PM alltracman78 ^
Very good point.
That can and will put pressure ... Feb 15, 2007 - 1:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 4th, 2025 - 3:15 PM |