Feb 9, 2007 - 12:47 AM
|
|
|
Enthusiast ![]() ![]() Joined Dec 24, '06 From jonesville Currently Offline Reputation: 4 (100%) |
i know this is a stupid question....but u know how 240s can convert their calipers to the 300zx well i was wonderin if anyone has researched supra brakes and if they fit GTs...sry if its a stupid question was kinda hopin it would wrk tho..and i dont know that much abt. brakes so any advice would b great.
|
![]() |
Feb 20, 2007 - 12:58 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 17, '04 From California Currently Offline Reputation: 20 (100%) |
If you want to improve your stopping power, i highly stand begind my new set up. I have an st so i upgraded both front and back to gt Rotors/calipers. Obviously you could skip this step if you have a gt. I got a set of steel braided brake lines from Russel. Also i upgraded to slotted Rotora rotors in the Front only. Hawk pads, and i also used a sythetic DOT 4 brake fluid opposed to DOT3. its just a little bit more but it has a higher boiling point than DOT3 and therefore if you are constantly aplying the brakes, it is less likely to boil and give you that sloppy peddal feel. Stops WAAAYYY better than before. I think the main ingrediant was the brake lines. the pedal feels way stiffer and the brakes respond a lot better. Good with it!
|
Kerr1 Brakes? Feb 9, 2007 - 12:47 AM
Punch You should try & see!!! Feb 12, 2007 - 2:33 AM
Gmoney1 well from wat i kno is that the supra's carry ... Feb 12, 2007 - 6:55 AM
playr158 rofl try the 2jz swap while you're at it!... Feb 12, 2007 - 9:27 AM
celicaST QUOTE(playr158 @ Feb 12, 2007 - 7:27... Feb 12, 2007 - 9:32 AM
95CelicaST QUOTEfor some reason i thought the mkiv supra shar... Feb 12, 2007 - 12:42 PM
playr158 QUOTE(95CelicaST @ Feb 12, 2007 - 12... Feb 12, 2007 - 1:59 PM
95CelicaST QUOTE(playr158 @ Feb 12, 2007 - 10:5... Feb 12, 2007 - 2:01 PM
celicaST QUOTE(95CelicaST @ Feb 12, 2007 - 12... Feb 12, 2007 - 5:12 PM
playr158 QUOTE(celicaST @ Feb 12, 2007 - 5:12... Feb 12, 2007 - 5:26 PM
celicaST QUOTE(playr158 @ Feb 12, 2007 - 3:26... Feb 12, 2007 - 6:23 PM
playr158 so if i'm a prick does that make you ignorant?... Feb 12, 2007 - 7:06 PM
95CelicaST Now now Playr, be nice. Feb 12, 2007 - 7:12 PM
GTSOwner -you don't have the weight of a supra
-you don... Feb 12, 2007 - 9:48 PM
Kerr1 thanx....i just dont wanna go flying off a mountai... Feb 12, 2007 - 10:49 PM
playr158 Calipers you have right now are way more then suff... Feb 12, 2007 - 11:02 PM
Kerr1 yea...i know i need new rotors and pads...wats tha... Feb 12, 2007 - 11:13 PM
trdproven Well, just to jump in here. Overall, if you chang... Feb 13, 2007 - 1:02 AM
Kwanza26 QUOTE(trdproven @ Feb 13, 2007 - 6:0... Feb 15, 2007 - 4:14 PM
GTSOwner QUOTE(Kerr1 @ Feb 12, 2007 - 11:13 P... Feb 13, 2007 - 7:31 AM
jdg371 no real need for drilled/slotted unless your hard ... Feb 14, 2007 - 11:12 PM
Kerr1 just ordered some tha other day!! should b... Feb 19, 2007 - 9:44 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 6:58 AM |