Clear Headlight Lense, Gonna try to make one Options

[LeonStryfe]

Hey guys do you know where I can get these lense http://lh5.google.com/image/ash.armstrong/....JPG?imgmax=512
I just need the high beams part, cause I'm gonna take a plastic clear glass, the same glass that they use in procar parts in our clear lense turn signal and mold (bake it and shape it) to the shape of that part they put to cover the headlight hole.

My plan if you can imagine it is to create a clear lense cover that would look like the picture above (only for high beams and its clear!) and put a angel eyes halo around the diameter of the inner circular area - outside diameter of the high beams.

Also if I can make this, I can most likely mass copy them and possible sell them to you guys if interested? This way its easier to install halos, in which we need not take off our bumper and heat our high beams.

[playr158]

you can't just sand them out...
i've done it before you'll never get them perfectly clear i've personnally taken a 6gc headlight and tried...you have to sand blast it or something i forget but its not just grinding and sanding..plus you arn't going to get a perfectly smooth/even surface by hand neways

This post has been edited by playr158: Feb 22, 2007 - 6:25 PM