![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jan 23, '05 From Portage Currently Offline Reputation: 5 (100%) ![]() |
Well I am finishing the installation of my freshly rebuilt 5s all the fluids are in and I make the first attempt to start it. It cranks but doesn't fire. I have NO spark. The distributor is freshly rebuilt with the timing set correctly. I checked the ignitor with a voltage meter and it's reading as it should. My big green book says that the next thing would be the crank sensor but a new one is like $90 dollars so needless to say I don't want to go wasting money. I just want to know what you guys think the issue could be. All help is appreciated.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jan 23, '05 From Portage Currently Offline Reputation: 5 (100%) ![]() |
could that also be the reason im not getting all that much fuel? the crank sensor is getting the proper power. i just ordered another igniter and have my fingers crossed! btw i really appreciate your reply anything helps. the distributor is new so i doubt it is the cam sensor since it's inside correct?
This post has been edited by AllTrac96: Feb 24, 2007 - 3:42 AM |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 12:14 PM |