6G Celicas Forums

Welcome Guest ( Log In | Register )

> search for header
post Mar 1, 2007 - 2:52 AM
+Quote Post
lifesagt

Enthusiast

Joined Mar 1, '07
From Yorkshire
Currently Offline

Reputation: 0 (0%)




I'm patiently searching for a header to fit my 2l celica. It has to fit a 3sfe. Rare as hens teeth i presume, i've been looking for a week and no luck. Anyone know where they can be sourced?
 
Start new topic
Replies
post Mar 1, 2007 - 12:28 PM
+Quote Post
3WayStunna

Enthusiast
****
Joined Jun 25, '06
From Box Elder, South Dakota
Currently Offline

Reputation: 2 (100%)




the 3sge headers will work fine...same manifolds, and such....i think fujitsubo makes one for the 3sge..


--------------------
(\__/)
(='.'=) This is bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
post Mar 1, 2007 - 1:02 PM
+Quote Post
Bigmeanbulldog55



Enthusiast
*****
Joined Jun 1, '03
From WV
Currently Offline

Reputation: 2 (100%)




QUOTE(3WayStunna @ Mar 1, 2007 - 12:28 PM) [snapback]531720[/snapback]

the 3sge headers will work fine...same manifolds, and such....i think fujitsubo makes one for the 3sge..

I have one for sale too. It's for a 3rd gen 3sge. Awsome equal length design and looks great. Too bad it doesn't bolt to the 5sfe or 3sfe heads. You need a 2nd gen 3sge manifold for that. I wish someone would have told me that before I bought this one. It would make a nice upgrade for a 3rd gen 3sgte for use as an up-pipe.


--------------------
Live Free, Be Happy
IPB Image
post Mar 1, 2007 - 2:24 PM
+Quote Post
Negative



Enthusiast
*****
Joined Apr 28, '04
From Houston, Texas
Currently Offline

Reputation: 2 (100%)




QUOTE(Bigmeanbulldog55 @ Mar 1, 2007 - 6:02 PM) [snapback]531734[/snapback]

QUOTE(3WayStunna @ Mar 1, 2007 - 12:28 PM) [snapback]531720[/snapback]

the 3sge headers will work fine...same manifolds, and such....i think fujitsubo makes one for the 3sge..

I have one for sale too. It's for a 3rd gen 3sge. Awsome equal length design and looks great. Too bad it doesn't bolt to the 5sfe or 3sfe heads. You need a 2nd gen 3sge manifold for that. I wish someone would have told me that before I bought this one. It would make a nice upgrade for a 3rd gen 3sgte for use as an up-pipe.


Explain? I'm interested to know the differences. Did 3rd gen 3s-ge get the same little change that the 3rd gen 3s-gte manifold got - the two bolts on the far right [or is it far left?] are directly in line up to bottom? If that's all it can easily be modified. I would be willing to do it for someone for free if they sent it to me and paid for shipping both ways. And WTF is an up-pipe?

This post has been edited by Negative: Mar 1, 2007 - 2:28 PM


--------------------
IPB Image
post Mar 1, 2007 - 7:34 PM
+Quote Post
Bigmeanbulldog55



Enthusiast
*****
Joined Jun 1, '03
From WV
Currently Offline

Reputation: 2 (100%)




QUOTE(Negative @ Mar 1, 2007 - 2:24 PM) [snapback]531770[/snapback]

QUOTE(Bigmeanbulldog55 @ Mar 1, 2007 - 6:02 PM) [snapback]531734[/snapback]

I have one for sale too. It's for a 3rd gen 3sge. Awsome equal length design and looks great. Too bad it doesn't bolt to the 5sfe or 3sfe heads. You need a 2nd gen 3sge manifold for that. I wish someone would have told me that before I bought this one. It would make a nice upgrade for a 3rd gen 3sgte for use as an up-pipe.


Explain? I'm interested to know the differences. Did 3rd gen 3s-ge get the same little change that the 3rd gen 3s-gte manifold got - the two bolts on the far right [or is it far left?] are directly in line up to bottom? If that's all it can easily be modified. I would be willing to do it for someone for free if they sent it to me and paid for shipping both ways. And WTF is an up-pipe?

That's what I thought. That it was an easy mod. I'm no stranger to making custom stuff for the car. I usually have to do that because I can't afford name brand things. It looks like it's just bigger. It's the same lay-out and when you see a picture of it it looks the same. And when you hold it up to the car it looks like it would fit, until you get close. There is more distance between each exhaust port, it's over-all over an inch longer. If you want to try it, you're welcome to buy it from me. Like I said in Buying/Selling thread, I'll exsept any offer higher than what it's worth as scrap metal. It might as well go to some good use for someone.

QUOTE(3WayStunna @ Mar 1, 2007 - 12:28 PM) [snapback]531720[/snapback]

the 3sge headers will work fine...same manifolds, and such....i think fujitsubo makes one for the 3sge..

I doubt that. I think you may have your figures a little messed up there. I'm not saying you're lieing, I'm just saying that you are miss-informed. If the exhaust manifold is wider, it makes sence that the intake manifold would be wider too. Otherwise it wouldn't be as effective of an upgrade in engine design. I'll have to check to be sure though.


--------------------
Live Free, Be Happy
IPB Image
post Mar 2, 2007 - 10:25 AM
+Quote Post
Negative



Enthusiast
*****
Joined Apr 28, '04
From Houston, Texas
Currently Offline

Reputation: 2 (100%)




QUOTE(Bigmeanbulldog55 @ Mar 2, 2007 - 12:34 AM) [snapback]531907[/snapback]

QUOTE(Negative @ Mar 1, 2007 - 2:24 PM) [snapback]531770[/snapback]

QUOTE(Bigmeanbulldog55 @ Mar 1, 2007 - 6:02 PM) [snapback]531734[/snapback]

I have one for sale too. It's for a 3rd gen 3sge. Awsome equal length design and looks great. Too bad it doesn't bolt to the 5sfe or 3sfe heads. You need a 2nd gen 3sge manifold for that. I wish someone would have told me that before I bought this one. It would make a nice upgrade for a 3rd gen 3sgte for use as an up-pipe.


Explain? I'm interested to know the differences. Did 3rd gen 3s-ge get the same little change that the 3rd gen 3s-gte manifold got - the two bolts on the far right [or is it far left?] are directly in line up to bottom? If that's all it can easily be modified. I would be willing to do it for someone for free if they sent it to me and paid for shipping both ways. And WTF is an up-pipe?

That's what I thought. That it was an easy mod. I'm no stranger to making custom stuff for the car. I usually have to do that because I can't afford name brand things. It looks like it's just bigger. It's the same lay-out and when you see a picture of it it looks the same. And when you hold it up to the car it looks like it would fit, until you get close. There is more distance between each exhaust port, it's over-all over an inch longer. If you want to try it, you're welcome to buy it from me. Like I said in Buying/Selling thread, I'll exsept any offer higher than what it's worth as scrap metal. It might as well go to some good use for someone.


No thanks I was just offering to help whoever ended up with this out. I like custom fabricating stuff like this. Plus I already have a header.
I've never heard of any headers for s series tat were 1 wider with diff spacing for exhaust ports. Not that i've seen/heard of everything but are you sure this is for 3s and not some other motor entirely? That would require major changes to the engine but IDK.

This post has been edited by Negative: Mar 2, 2007 - 10:26 AM


--------------------
IPB Image

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 9th, 2025 - 7:27 AM