Pictures of my Sexy 20V 4age in my MR2! It now runs!!! Options

[MtyMseHarmer]

Well a little over a week ago I sent my wiring harness out to be converted from a silvertop to a blacktop ECU(ST runs off of AFM and blacktop runs off of MAP). While I had the harness out and some time I decided to do some painting of the motor. I also ordered some velocity stacks for it. Which I went ahead and painted them to match the valve cover. I took the spark plug cover and filled in any holes that I had in it from before when I debadged it and then painted it a gloss black. Looking at the pictures you can obviously tell everything isn't in its correct spots since I am still waiting on the harness. I will also be ordering some "sock" style filters for the stacks here in the next couple of days as well. Let me know what you think:






This post has been edited by MtyMseHarmer: Mar 3, 2007 - 3:37 PM

[MtyMseHarmer]

Ok I got my wiring harness back today and put it in along with the computer. I also got my air filters today and put them on. After finally doing what coomer did to gets his to run on blacktop ecu I got it to idle. I still have some tuning to do and I can't drive it yet since my front end is all apart(putting polyurathane bushings on it). I thought I would take a picture of the engine now with most of the things put back together. I still have a few things to do like figure out where to put the Map sensor and IAt sensor and clean up the wires to them, get a real vacuum line for the map sensor, and get the battery out of the bay but here is a couple of pictures of how it sits right now:



This post has been edited by MtyMseHarmer: Mar 2, 2007 - 11:06 PM