 removing driveaxle, help |
 Mar 5, 2007 - 2:20 PM
|
 
|
|
Enthusiast Joined Feb 22, '07 From Philadelphia Currently Offline Reputation: 0 (0%)  |
im trying to remove the driver side drive axle from the transmission and it wont budge. its a 95 st, 7a-fe 1.8L. i already removed the axle from the hub but cant get it out of the transmission. it will move a little bit in and out of the transmission but nowhere close to coming out. is it bolted down somewhere? or is there a clamp thats holding it in or should i just try and pry it out. im afraid of breaking something if its still being held in by something.
|
 |
Replies
|
Mar 5, 2007 - 2:59 PM
|
|
 Enthusiast  Joined Jan 22, '07 From North Carolina Currently Offline Reputation: 0 (0%) |
What I meant you could do is after you have removed the passenger side axle, stick a screwdriver through the transmission and use a hammer to beat on the axle. Make sure the screwdriver is skinny enough to clear the shaft that goes between the axles. While someone does that, have someone jerk on the axle, just make sure not to pull on the CV joint.
 |
Posts in this topic
95celly removing driveaxle Mar 5, 2007 - 2:20 PM
My2Celi i went to autozone and rent myself a puller, it ha... Mar 5, 2007 - 2:36 PM 95CelicaRacer The right side has a locking ring on it, and it ca... Mar 5, 2007 - 2:42 PM
95celly QUOTE(95CelicaRacer @ Mar 5, 2007 - 7... Mar 5, 2007 - 2:48 PM 95celly and that wont damage the locking ring on the drive... Mar 5, 2007 - 3:01 PM 95CelicaRacer No, It won't hurt the locking ring. Just make... Mar 5, 2007 - 3:06 PM 95celly i took the axle out of the passenger hub and it is... Mar 5, 2007 - 3:48 PM My2Celi why not try my way? The slide hammer will help you... Mar 5, 2007 - 4:10 PM 95celly im going to auto zone tomorrow to get one, i figur... Mar 5, 2007 - 5:46 PM Negative Be careful. My friend royally screwed up the Diff ... Mar 5, 2007 - 6:08 PM Salica Im about to change my passenger side driveaxle im ... Jan 20, 2009 - 12:44 PM azian_advanced you will need a press to swap the axle carriers.. ... Jan 20, 2009 - 3:06 PM Agent21 That ring comes out way easy with a screw driver. ... Jan 20, 2009 - 5:53 PM blu94gt Should just pry out. Get a good pry bar to pry be... Jan 21, 2009 - 3:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 12:44 PM |