 removing driveaxle, help |
 Mar 5, 2007 - 2:20 PM
|
 
|
|
Enthusiast Joined Feb 22, '07 From Philadelphia Currently Offline Reputation: 0 (0%)  |
im trying to remove the driver side drive axle from the transmission and it wont budge. its a 95 st, 7a-fe 1.8L. i already removed the axle from the hub but cant get it out of the transmission. it will move a little bit in and out of the transmission but nowhere close to coming out. is it bolted down somewhere? or is there a clamp thats holding it in or should i just try and pry it out. im afraid of breaking something if its still being held in by something.
|
 |
Replies
|
Mar 5, 2007 - 3:48 PM
|
|
|
Enthusiast Joined Feb 22, '07 From Philadelphia Currently Offline Reputation: 0 (0%) |
i took the axle out of the passenger hub and it is doing the same thing as the driver side hub, it wont come out. other people have told me that it should slide out easily after unboltig two bolts but its not coming out easily and im not exactly sure which bolts need to come out. any suggestions?
|
Posts in this topic
95celly removing driveaxle Mar 5, 2007 - 2:20 PM
My2Celi i went to autozone and rent myself a puller, it ha... Mar 5, 2007 - 2:36 PM 95CelicaRacer The right side has a locking ring on it, and it ca... Mar 5, 2007 - 2:42 PM
95celly QUOTE(95CelicaRacer @ Mar 5, 2007 - 7... Mar 5, 2007 - 2:48 PM 95CelicaRacer What I meant you could do is after you have remove... Mar 5, 2007 - 2:59 PM 95celly and that wont damage the locking ring on the drive... Mar 5, 2007 - 3:01 PM 95CelicaRacer No, It won't hurt the locking ring. Just make... Mar 5, 2007 - 3:06 PM My2Celi why not try my way? The slide hammer will help you... Mar 5, 2007 - 4:10 PM 95celly im going to auto zone tomorrow to get one, i figur... Mar 5, 2007 - 5:46 PM Negative Be careful. My friend royally screwed up the Diff ... Mar 5, 2007 - 6:08 PM Salica Im about to change my passenger side driveaxle im ... Jan 20, 2009 - 12:44 PM azian_advanced you will need a press to swap the axle carriers.. ... Jan 20, 2009 - 3:06 PM Agent21 That ring comes out way easy with a screw driver. ... Jan 20, 2009 - 5:53 PM blu94gt Should just pry out. Get a good pry bar to pry be... Jan 21, 2009 - 3:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2025 - 12:36 PM |