![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 1, '05 From Charlotte NC Currently Offline Reputation: 14 (100%) ![]() |
i just wanted to say that the consensus on boost being addictive is right... i thought i could fight it, but i just need "a little bit more"
![]() most of you have seen the dyno sheet, and i was wondering what should i do from here? I will be getting a 3" custom downpipe and exhaust hopefully before the 17th (going to the track) but what should be next? maybe some engine management? mod to the turbo and IC? (or new ones?) my goal is to get at least 40 or 60 more whp and I KNOW i will be satisfied then. im open too suggestions! what have you guys done? or would do? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
yeah it has 550s but doesnt it need them just because of the air flow capacity of the ct20b, aggressive cam and tuning?
if Toyota could of gotten away with a smaller injector they probably would have used it, right? thats what i thought at least. I thought the 550s were used the same percentage as the 440s on a gen2, that you could only add so much power before upping injector size, safc to add fuel or upping fuel pressure. Im not to familiar with the gen4 characteristics though. if you only want 40 or so thats only about 5 more pounds of boost if the turbo isnt already above its efficiency range. what did you put down for numbers again eastern? -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 10:19 AM |