Finaly done....or am I?... *UPDATED Nov 3*, Starting winterizing/rear end overhaul Options

[Valo666]

So, after talkin it through with alot of my friends, parents, family, etc. I decided that Im gonna keep my celica. Im gonna still be taking it off the road for a few months. So i decided that while its off the road, and im working im gonna put some $ into the car to get it back up to par of where i want it. So i decided to do a list of things i need to get done with the car. My goal is to have it all done by august 1st. So...pretty much, i need to get all of this done in the next 5 months or so.

Tint windows, re-upholster/re-cover rear seats, fix seat back *amp pulled the backing of my rear seats off cuz of its weight*, move amp *obvious reasons*, get oem strut bar covers for rear, weld up e-brake bracket *part of it got ripped off and i gotta tig weld it back into place*, clean up/paint calipers, buy new/used rear controll arms, recondition controll arms, install control arms, get new window gaskets and install them, get new drivers side vent, re-paint interior plastics, get jdm tails, get jdm projectors, fix wobbel in shifter *gotta tighten down the bolts*, new sway bar end links for front, get new wheel bearings on all 4 corners, wrap up exhaust and intake piping in heat wrap, re-vamp intake, fix door rust and hatch rust, undercoat car, clean up rear strut bar, get new TRD plate frames, fix paint chips and blemishes, de-badge rear, new front strut bar *probably cusco*, install gauges, buy DCW single pod, paint and install 5th gen mirrors, get new sunroof, re-do headliner

So, the list starts tomorrow....first step stage 3 of my celica. wish me luck

This post has been edited by Valo666: Nov 3, 2007 - 9:21 PM

[Valo666]

well most of my parts are back in toronto, but i did manage to collect some new parts/parts i needed to buy. I got pretty much every thing i needed except for my rear strut bar covers. I ordered em from Toyota, waited 2 days, went to pick em up and they said it would b on back order untill the 22nd or so. But i did manage to get some things i needed to buy.



Trisco Vacuum gauge..$20 brand new

extension peice for my t-fitting on my oil pressure sending unit, shrink wrap, connectors, 18GA wire in 25 foot spools ($1.50 each from princess auto)

New TRD plate frames


hehe..."The List" phase 4..ive re-written this thing 3 times already, but i keep adding things to the list i forget about. Its probably gonna be closer to two pages by the time im done. So, im heading back to Toronto tomorrow, and first thing im doing when i get home is going out to buy some paint and some other little bits and peices im gonna need. Ill keep you guys posted with the progress.

This post has been edited by Valo666: Mar 8, 2007 - 4:43 PM