Racing seats and seat belt light? Options

[NapTown94]

Hey guys,

I'm installing a set of racing seats here shortly with some 4 point harnesses, but if I install the 4-points and take out the factory seatbelt, will the "fasten seat belt" light still be on? if so, how can I fix this? im just getting into the tuner scene, so help a fellow celi out. thanks!

[Valo666]

just a warning you should check your local laws about 4 points. Here in canada, you cant use 4point harnesses as a suitable seatbelt for the street unless you go with something of high high quality (IE Takata, OMP or Sabelt) even then its a grey area. But as for the wiring to keep the light off, you can snip the wires about 4 inches below the buckel and just soilder them together. Or just take the bulb out..bulb would b the best/safest bet mainly because if you ever have to put your OEM belts back in, you can just but the bulb back in. Also, make sure you mount your seat belts in the proper way AKA using a rear strut bar or harness bar other wise you could injure your self serverly. Spine compressions are fun.

This post has been edited by Valo666: Mar 8, 2007 - 5:18 PM