Mar 7, 2007 - 1:10 PM
|
|
|
Enthusiast ![]() Joined Mar 23, '06 From Mass Currently Offline Reputation: 0 (0%) |
Hi i'm Chandy. I was wondering if they way I drive can hurt my car. Because my car has a 7afe I'm trying to be very economical. So I shift really early. What happens to my car if I drive it in the low rpms? I'm a little worried about the water that comes out the muffler because it is below freezing here in mass.
|
![]() |
Mar 9, 2007 - 12:33 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
QUOTE(chandy1986 @ Mar 8, 2007 - 4:58 PM) [snapback]534375[/snapback] QUOTE(playr158 @ Mar 8, 2007 - 10:08 AM) [snapback]534259[/snapback] if your below 2,000 rpm you are too low keep it between 2,000rpm and 3,500rpm and you will be fine a 3-3.5k rpm shift point works very well for these cars So by wat u guys are telling me im shifting a bit to early one more question for those with a manual wat rpms do get the clutch to engage? I engage the clutch at 1k but it seems to stutter so i usually try to engage at 1200. is this to low? Does this hurt the clutch? and im guessing my driving is hurting my tranny as well. since i want to prolong the life of my lil celica I should adjust my habit of shifting early hehe Thanks for all the advice. everyone's been a great help yes you're doing it pretty wrong... how do you go anywhere? i would seriously hate to be behind you at like turtle pace..no offense but yea you should be pushing the pedal in to shift @ 3,000 to 3,500 rpm for an upshift..you shouldn't even consider an upshift before 2,500rpm |
chandy1986 am i hurting my car? Mar 7, 2007 - 1:10 PM
TheRockman I would imagine shifting at low rpms would be more... Mar 7, 2007 - 1:23 PM
nightryder you ever touch your exhaust after even a short dri... Mar 7, 2007 - 1:43 PM
TheRockman QUOTE(nightryder @ Mar 7, 2007 - 1:4... Mar 7, 2007 - 2:05 PM
nightryder QUOTE(TheRockman @ Mar 7, 2007 - 2:0... Mar 8, 2007 - 11:45 AM
chandy1986 Theres a dont not touch label on the exaust manifo... Mar 8, 2007 - 7:26 AM
InfamousChappy QUOTE(chandy1986 @ Mar 8, 2007 - 7:2... Mar 8, 2007 - 10:06 AM
hurley97 QUOTE(chandy1986 @ Mar 8, 2007 - 7:2... Mar 8, 2007 - 10:28 AM
playr158 if your below 2,000 rpm you are too low
keep it b... Mar 8, 2007 - 10:08 AM
jc47 If you make a lot of short trips, water can build ... Mar 8, 2007 - 1:27 PM
rjbibeau QUOTE(jc47 @ Mar 8, 2007 - 6:27 PM) ... Mar 8, 2007 - 1:43 PM
chandy1986 QUOTE(playr158 @ Mar 8, 2007 - 10:08... Mar 8, 2007 - 4:58 PM
bindertch QUOTE(playr158 @ Mar 8, 2007 - 8:08 ... Mar 8, 2007 - 7:32 PM
jason get a vacum gauge, if you can keep it to specs you... Mar 8, 2007 - 9:16 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 6th, 2025 - 2:49 PM |