Need your opinions on a mix of things.., Projector Lights / Wiring / HID Options

[speedracer_2020]

So I ordered my low beam projectors and they should be here shortly.

Now here's my deal. How hard is it to wire up in the USDM celicas? Is it just a matter of getting the proper sockets (plugs) for the bulb cutting the stock ones and just rewiring the new ones in, or is there more chaos? Do the projectors screw right in?


Also. I'm planning on getting a nice HID kit (I get them rather cheap $350 US or so..) for the low beams. What do you guys recommend? Would it look good in the projectors? Is it too hot for the projectors?

Any bit of info would be great! Thanks,

Shaun

[speedracer_2020]

Thanks John and Coomer!

First, coomer, yeah I did have a higher wattage bulb in there (me being stupid thinking Toyota was invincible...) and well I am suffering now. Stress. Hopefully when I jump to HID this problem will be killed.

And John, thanks! Do you know what application those plugs came from? The H1 bulbs go straight into the projector, and the things the H1s plug into you got form Honda. So it's just a snip-snip, rewire and tape job eh?

Do you know what application those little things are from? What would I ask them for? Thanks:)

Shaun